DATA LOGGER WITH EXTERNAL TEMPERATURE PROBE

The Recorder – External temperature probe duo is the ideal tool for contact temperature measurement

I request a quote
I try it
  • Industrial box

  • 1 or 2 probes reference

  • Digital temperature sensor

The advantages of LGR36 and LGR46, data loggers for external probe 

  • SIMPLE AND QUICK
    Easy and quick to install. You can move your data loggers at will.
  • SECURING MEASUREMENTS
    All your measurements are stored in the temperature data logger then transmitted by radio to a PC or to the Newsteo Cloud
  • EXTERNAL PROBE FOR PIPING
    Optimized for domestic hot water temperature monitoring

How it works ?

  • 1 Install the data logger and its probe
  • 2 The data logger transmits the recorded data by radio to the receiver: a PC equipped with the RF Monitor software or a Newsteo Gateway which downloads the measurements to a web application.
  • 3 In the event of an anomaly, a notification is sent
  • 4 You find all your data in the form of curves, graphs... and can export them whenever you want.

FOR WHO ?

monitor the temperature

LGR36 single probe

Storage under controlled temperature

temperature monitoring for cold rooms

Cold room temperature monitoring
in transport, in storage

LGR46 dual probe

Sanitary hot water

pipe temperature monitoring, prevention of the appearance of legionella

YOUR ONLINE QUOTE

  • Free quote

  • Response within 24 hours

  • Without engagement

I request a quote

Technical characteristics of the LGR36 and LGR46 temperature data loggers

lgr36

PFPN-LGR36-001

LGR36
probe 1 sensor

lgr46

PFPN-LGR46-001

LGR46
probe 2 sensors

Measuring Range Depending on the probe (max. range: -40°C to +80°C)
Accuracy ± 0.3°C, probe connected
Casing operating temperature -40°C to +85°C
Internal temperature sensor Temperature sensor inside the casing (in addition to the probe temperature sensor)
Measurement frequency Can be set from one measure every seconds to one every 4 hours
Memory Capacity Up to 32 256 measurements with date and time.
Measurement securisation Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission
Back-up of the last 36.000 measurements in Logger memory even after transmission to the receiver
Calibration COFRAC calibration on order
Battery AA Lithium Thionyle (3,6V) included, special design with plug to maintain the battery
Accessible and user replaceable battery
Optional: dual battery pack to double battery life
Autonomy Up to 3 years (at 25°C with a frequency measure of 15 minutes).
Radio range Up to 900 meters (with supplied antenna)
Supplied antenna 1/2 wave antenna
  • Dimensions 98mm x 64mm x 34mm
  • Weight with battery 250g
  • Casing Robust aluminum (4mm) with mounting plate supplied screwed under the case for 4-point mounting or strap passage windows
  • IP level IP65

TEMPERATURE PROBES AVAILABLE WITH THE LGR36 RECORDER

PFPN-STE51-002

STE51-002

PFPN-STE51-003

STE51-003

PFPN-STE51-004

STE51-004

PFPN-STE51-005

STE51-005

Probe type Probe with integrated temperature sensor Probe with digital sensor in stainless steel tip Newsteo temperature probe with integrated temperature sensor, specially designed for the door seal (ribbon cable on 40 cm) Probe with integrated temperature sensor
Range of measure -40°C … +80°C -40°C … +80°C, compliant with temporary temperature peaks up to 100 ° C in fixed installation. -40°C … +80°C -40°C … +80°C, compliant with temporary temperature peaks up to 100 ° C in fixed installation.
Accuracy ± 0.3°C (-30°C … +60°C)
Total Lenght 5 meters 5 meters Round cable of 2 meters (to be connected to the datalogger)
Ribbon cable (to be put under the door seal) : length : 400 mm, thickness : 0.5 mm (the ribbon cable is an extension of the external cable)
5 meters
Tip Measurement tip integrating the temperature sensor: small plastic box Tip: cylindrical stainless steel tip, protected by an aluminum hood, for:
– Mechanical protection
– Homogenization of the temperature around the sensor element sheathed in stainless steel.
– Guide for aligning it with the pipe

TEMPERATURE PROBES OFFERED WITH THE LGR46 RECORDER

PFPN-STT51-002

STT51-002

PFPN-STT51-003

STT51-003

Probe type Probe with 2 integrated temperature sensors
Range of measure – 40° to + 80°C, compliant with temporary temperature peaks up to 100°C in fixed installation.
Accuracy ± 0.3°C (-30°C … +60°C)
+/- 1°C (-40°C … -30°C and +60°C…+80°C)
Cable length 5 meters, diameter : 4.8 mm. The cable splits up after 20 centimeters. (Both probes are indepedent from each other upon 4.80 meters.)
Tip Cylindrical stainless steel tip Tip: cylindrical stainless steel tip, protected by an aluminum hood, for:
– Mechanical protection
– Homogenization of the temperature around the sensor element sheathed in stainless steel.
– Guide for aligning it with the pipe

THE SOFTWARE

your monitoring dashboard

Webmonitor

The monitoring web app

  • Display of measurements

  • Remote configuration of recorders and gateways
  • SMS, email and voicemail notifications

  • Automatic reports by email

  • Unlimited number of users

RF Monitor

PC monitoring software

Newsteo also offers the RF Monitor software, for management on a PC, locally, of measurements and recorders.

TRY IT

Do not hesitate to contact us to try the Newsteo Logger with temperature probe.

I try it

STEP 1

Click on the “I try it” button and fill out the form

STEP 2

Receive your Kit and try the product

STEP 3

Complete your installation, quickly adding more loggers

Discover our other temperature data loggers

LGR33

Temperature recorder for PT1000 probe

See the product

LGR37

Thermocouple Data Logger

See the product

DOWNLOAD

Download our brochures

   Newsteo general catalog

Newsteo_Catalogue_EN.pdf

Quick quote request

    Your name *

    Your email *

    Your phone*

    City *

    Country

    Company

    Can we help you?

    Our team is at your service from Monday to Friday from 9:00 a.m. to 6:00 p.m.

    +33 (0)4 84 83 05 44