The advantages of LGR36 and LGR46, data loggers for external probe
- SIMPLE AND QUICK
Easy and quick to install. You can move your data loggers at will. - SECURING MEASUREMENTS
All your measurements are stored in the temperature data logger then transmitted by radio to a PC or to the Newsteo Cloud - EXTERNAL PROBE FOR PIPING
Optimized for domestic hot water temperature monitoring
How it works ?
- 1 Install the data logger and its probe
- 2 The data logger transmits the recorded data by radio to the receiver: a PC equipped with the RF Monitor software or a Newsteo Gateway which downloads the measurements to a web application.
- 3 In the event of an anomaly, a notification is sent
- 4 You find all your data in the form of curves, graphs... and can export them whenever you want.
FOR WHO ?
monitor the temperature
LGR36 single probe
Storage under controlled temperature
temperature monitoring for cold rooms
Cold room temperature monitoring
in transport, in storage
LGR46 dual probe
Sanitary hot water
pipe temperature monitoring, prevention of the appearance of legionella
Technical characteristics of the LGR36 and LGR46 temperature data loggers
PFPN-LGR36-001 LGR36 |
PFPN-LGR46-001 LGR46 |
|
---|---|---|
Measuring Range | Depending on the probe (max. range: -40°C to +80°C) | |
Accuracy | ± 0.3°C, probe connected | |
Casing operating temperature | -40°C to +85°C | |
Internal temperature sensor | Temperature sensor inside the casing (in addition to the probe temperature sensor) | |
Measurement frequency | Can be set from one measure every seconds to one every 4 hours | |
Memory Capacity | Up to 32 256 measurements with date and time. | |
Measurement securisation | Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission Back-up of the last 36.000 measurements in Logger memory even after transmission to the receiver |
|
Calibration | COFRAC calibration on order |
Battery | AA Lithium Thionyle (3,6V) included, special design with plug to maintain the battery Accessible and user replaceable battery Optional: dual battery pack to double battery life |
Autonomy | Up to 3 years (at 25°C with a frequency measure of 15 minutes). |
Radio range | Up to 900 meters (with supplied antenna) |
Supplied antenna | 1/2 wave antenna |
- Dimensions 98mm x 64mm x 34mm
- Weight with battery 250g
- Casing Robust aluminum (4mm) with mounting plate supplied screwed under the case for 4-point mounting or strap passage windows
- IP level IP65
TEMPERATURE PROBES AVAILABLE WITH THE LGR36 RECORDER
PFPN-STE51-002
STE51-002 |
PFPN-STE51-003
STE51-003 |
PFPN-STE51-004 STE51-004 |
PFPN-STE51-005 STE51-005 |
|
---|---|---|---|---|
Probe type | Probe with integrated temperature sensor | Probe with digital sensor in stainless steel tip | Newsteo temperature probe with integrated temperature sensor, specially designed for the door seal (ribbon cable on 40 cm) | Probe with integrated temperature sensor |
Range of measure | -40°C … +80°C | -40°C … +80°C, compliant with temporary temperature peaks up to 100 ° C in fixed installation. | -40°C … +80°C | -40°C … +80°C, compliant with temporary temperature peaks up to 100 ° C in fixed installation. |
Accuracy | ± 0.3°C (-30°C … +60°C) | |||
Total Lenght | 5 meters | 5 meters | Round cable of 2 meters (to be connected to the datalogger) Ribbon cable (to be put under the door seal) : length : 400 mm, thickness : 0.5 mm (the ribbon cable is an extension of the external cable) |
5 meters |
Tip | Measurement tip integrating the temperature sensor: small plastic box | Tip: cylindrical stainless steel tip, protected by an aluminum hood, for: – Mechanical protection – Homogenization of the temperature around the sensor element sheathed in stainless steel. – Guide for aligning it with the pipe |
TEMPERATURE PROBES OFFERED WITH THE LGR46 RECORDER
PFPN-STT51-002
STT51-002 |
PFPN-STT51-003
STT51-003 |
|
---|---|---|
Probe type | Probe with 2 integrated temperature sensors | |
Range of measure | – 40° to + 80°C, compliant with temporary temperature peaks up to 100°C in fixed installation. | |
Accuracy | ± 0.3°C (-30°C … +60°C) +/- 1°C (-40°C … -30°C and +60°C…+80°C) |
|
Cable length | 5 meters, diameter : 4.8 mm. The cable splits up after 20 centimeters. (Both probes are indepedent from each other upon 4.80 meters.) | |
Tip | Cylindrical stainless steel tip | Tip: cylindrical stainless steel tip, protected by an aluminum hood, for: – Mechanical protection – Homogenization of the temperature around the sensor element sheathed in stainless steel. – Guide for aligning it with the pipe |
THE SOFTWARE
your monitoring dashboard
Webmonitor
The monitoring web app
Display of measurements
- Remote configuration of recorders and gateways
SMS, email and voicemail notifications
Automatic reports by email
Unlimited number of users
RF Monitor
PC monitoring software
Newsteo also offers the RF Monitor software, for management on a PC, locally, of measurements and recorders.
Discover our other temperature data loggers
Quick quote request
Can we help you?
Our team is at your service from Monday to Friday from 9:00 a.m. to 6:00 p.m.
+33 (0)4 84 83 05 44