Temperature & humidity probe for wireless measurements
industrial wireless data logger
Newsteo Logger LGR32, with temperature and humidity probe
The Newsteo temperature and humidity data logger with probe is a standalone recorder, battery powered, which delivers real-time measurements to a supervisory position. Temperature and humidity sensors are digital sensors, enabling high accuracy (± 0.2 ° C & ± 1.8%) and a use in condensing atmosphere.
LGR 32 : Temperature and Humidity Datalogger with probe
Who uses the LGR32, temperature & humidity datalogger?
- Industrial process monitoring
- Temperature and humidity monitoring in industrial paint hangar
How does it work?
Installing recorders / data loggers
Technical specifications
Product type
Temperature & Humidity datalogger with external probe
Reference
PFPN-LGR32-001
PROBE STH54-001
Probe Operating temperature
– 40°C … +125°C (extremity of the cable, where the sensor is)
– 25°C … +80°C (cable)
Accuracy
± 0.2°C [0 … 60 °C]
Temperature resolution
0.015 °C
Electronic board temperature
Integrated temperature sensor on the LGR32 electronic board
Humidity range of measure
0 … 100%RH
The maximum dew point is brought down to 80°C
Dew formation resistant probe
Accuracy Humidity
± 1.8%RH @23°C
(0 … 80%RH)
Humidity resolution
0.03%
Dew point temperature
Yes
Casing Operating temperature
–40°C to +85°C
Measurement frequency
Can be set from one measure every second to one every 4 hours
Memory Capacity
Up to 32 768 measurements with date and time
Measurement securisation
Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission
Back-up of the last 32.000 measurements in Logger memory even after transmission to the receiver
Sensor connection
Through connector available on the top of the logger
Certification
COFRAC on order
Battery
AA Lithium Thionyle (3,6V) included, special design with plug to maintain the battery
Accessible and user replaceable battery
Optional: dual battery pack to double battery life
Battery life
Up to 3 years (at 25°C with a frequency measure of 15 minutes)
Dimensions
98mm x 64mm x 34mm
Weight with battery
250g
Casing
Aluminium
IP level
IP65
Radio frequency
ISM 868 MHz
Radio range
Up to 900 meters (with supplied antenna)
Antenna
1/2 wave antenna
Humidity and Temperature probe for Newsteo Logger LGR32
PFPN-STH54-001
- Temperature measurement range :
– 40 … +125 °C
accuracy : ±0.2°C from 0 to 60 °C - Humidity measurement range :
0 … 100 % (the maximum dew point is brought down to 80°C)
dew formation resistant
Accuracy @23°C of ± 1.8% RH from 0 to 80 % RH - In factory calibration
- Sensor protected in a stainless steel tip
- Probe + cable length : 5m
- Diameter of the stainless steel protection: 10 mm
