Wireless transmission for dry contact sensor
Industrial wireless sensor
Newsteo Logger LGS36, to turn every sensor into wireless switch-off sensor
The Newsteo Logger LGS36 allows you to connect any type of switch-off sensor (ON/OFF type). The Logger sends by radio to the supervision centre all the measures done by the sensor. The logger can also store the measures in its embedded memory.
Product references:
- LGS 36: wireless measurement data logger with switch-off sensor interface, 2 inputs
Connection cables: the client can connect the sensor of his choice.
Sensors to connect:
- Switch
- Contact
- …
Who uses the Newsteo datalogger for switch-off sensor ?
Switch sensor user: move from a wired connection to a wireless connection, safer, faster to install and less expensive
How does it work?
Installing recorders / Data Loggers
Technical specifications of the Newsteo Logger LGS36, Datalogger for switch sensor
Product type
Logger for switch-off sensor
Reference
PFPN-LGS36-001
Number of inputs
2
Range of measure
0 / 1 (10 Hz)
Operating temperature
-40°C to +85°C
Temperature measurement
Integrated temperature sensor on the electronic board
Measurement frequency
Can be set from one measure every second to one every 4 hours
Memory capacity
Up to 32 768 measurements with date and time
Measurement securisation
Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission
Back-up of the last 32.000 measurements in Logger memory even after transmission to the receiver
Sensor connection
Through connector available on the top of the logger
> Newsteo connection cables
Battery
AA Lithium Thionyle (3,6V) included, special design with plug to maintain the battery
Accessible and user replaceable battery
Optional: dual battery pack to double battery life
Autonomy
Up to 3 years (at 25°C with a frequency measure of 15 minutes)
Dimensions
98mm x 64mm x 34mm
Weight with battery
250g
Casing
Aluminium
IP level
IP65
Radio frequency
ISM 868 MHz
Radio range
Up to 900 meters (with supplied antenna)
Antenna
1/2 wave antenna (included)
Connection cables for data logger
PFPN-SES55-001
- Cable to connect the sensor of your choice to the LGS36.
- The cable is provided with fast contactors
