Wireless counting pulse
Industrial wireless sensor
Newsteo Data Logger for impulse sensor
The Newsteo Logger LGS39 allows you to connect any type of impulse sensor (flowmeter, rain gauge…). The Logger sends by radio to the supervision centre all the measures done by the sensor. The logger can also store the measures in its embedded memory.
Products references:
- LGS39: wireless transmission and measurement system with impulse sensor interface
- Connction cable: the client can connect the sensor of his choice.
Sensors to connect:
- Rain gauge
- Flowmeter
- Gas meter, remote metering
Who uses the Newsteo datalogger with impulse interface?
- Pulse sensor users: move from a wired connection to a wireless connection, safer, faster to install and less expensive
- Gas meters: Perform real-time meter readings remotely.
How does it work?
Installing recorders / Data Loggers
Technical specifications
Type
Logger for Impulse sensor
Reference
PFPN-LGS39-001
Impulse frequency
Minimum pulse duration
20 ms
Commutation type
Dry contact or CMOS 0-3.5V
Operating temperature
-40°C … +85°C
Temperature measurement
Integrated temperature sensor
Measurement frequency
Can be set from one measure every second to one every 4 hours
Memory Capacity
Up to 32 768 measurements with date and time
Measurement securisation
Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission
Back-up of the last 32.000 measurements in Logger memory even after transmission to the receiver
Sensor connection
Through connector available on the top of the logger
> Newsteo connection cable
Battery
AA Lithium Thionyle (3,6V) included, special design with plug to maintain the battery
Accessible and user replaceable battery
Optional: dual battery pack to double battery life
Autonomy
Up to 3 years (at 25°C with a frequency measure of 15 minutes)
Dimensions
98mm x 64mm x 34mm
Weight with battery
250g
Casing
Aluminium
IP level
IP65
Radio frequency
ISM 868 MHz
Radio range
Up to 900 meters (with supplied antenna)
Antenna
1/2 wave antenna (included)
Connection cables for data logger
PFPN-SES55-001
- Cable to connect the sensor of your choice to the LGS.
- The cable is provided with fast contactors.
Evaluate the Newsteo logger with impulse sensor interface
- A LGS39
- A cable SES55 to connect the sensor of your choice to the LGS
- A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
- A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.
Price of the kit: 278 € excl. VAT, preparation and shipping costs in addition.
