FULLY PUT INTO THS FOUNDATIONS
Concrete instrumentation
Newsteo Builder, Wireless datalogger with temperature and extensometer probe for concrete quality measurement
The concrete quality depends on the respect of the setting and curing of it. Newsteo has developed, in partnership with Lafarge R&D laboratory the Newsteo Builder, a datalogger to install directly in concrete. It allows recording and remotely check the temperature and deformation of concrete in the first hours of the setting and during the following years.
The Newsteo Builder can also be used for diagnosis sulphatic reaction, a concrete pathology.
Integrated sensors:
- Temperature (reference BLR36)
- Temperature and strain gauge (reference BLR37). The strain gauge associated with the product is a coated Vishay gauge specially designed for inclusions in concrete.
Functionning
The Newsteo Builder includes temperature and deformation sensors.
It is directly buried (antenna included) into the concrete and it records the corresponding measurements in its embedded memory. When the user wishes, he downloads over the air all the measurements. With the long range antenna, the radio remains operational even under foundations or major works.
As all the measurements are dated, the user gets the complete history of the supervised concrete.
2 versions of the Newsteo Builder are available, with or without the shrinkage sensor.
Technical specifications of the Newsteo Builder, wireless datalogger for concrete
Product reference
PFPN-BLR36-001: temperature
PFPN-BLR37-001: temperature and deformation
Temperature range of measure
-20°C … +80°C
Temperature Accuracy
+/- 0.3°C
Deformation range of measure
BLR37 : -1850 ppm to +1850 ppm for a bridge excitation of 2.7 Volt
Deformation Accuracy
BLR 37 : +/- 0.56 ppm in voltage
Operating temperature
-20°C … +80°C
Measures Frequency
Can be set from 10 minutes to 4 hours
Memory Capacity
32 256 measurements with date and time
Measurement securisation
Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission
Back-up of the last 32.000 measurements in Logger memory even after transmission to the receiver
Autonomy
From 5 to 10 years (depending on measure frequency and Operating temperature)
Battery
Size D Lithium Thionyle included
Weight with battery
300g
Dimensions
Casing: 132 x 75 x 70 mm
Antenna cable: 5 meters
Casing
Made of yielding, tear-proof and unbreakable polyurethane
IP
IP 68
Resistant to dust, to liquid concrete, suitable for continuous immersion in water under static pressure of 6 bar.
Radio frequency
ISM 868 MHz
Evaluate the Newsteo Builder
- A Newsteo Builder with shrinkage sensor (BLR37)
- A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
- A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.
Price of the kit: 800 € excl. VAT, preparation and shipping costs in addition.