For any 4-20 mA Sensor
Wireless logger 4-20 mA
Newsteo Logger LGS34, wireless logger for 4-20mA sensor
The Newsteo solution enables any sensor conversion into a wireless sensor. Thus, it makes possible to visualize on a computer all the measurements done by sensors.
- LGS34: Data Logger for 4-20 mA sensor connection
The LGS34 allows connecting any 4/20mA sensor:
- Displacement
- Pressure
- Level
- Gas
- …
Who uses the Newsteo datalogger for 4-20 mA sensor?
4-20 mA sensor users: move from a wired connection to a wireless connection, safer, faster to install and less expensive
How does it work?
Installing recorders / Data Loggers
Technical specifications of the Newsteo Logger LGS34, datalogger for 4-20 mA sensor
Product type
Logger for 4-20 mA sensor connection
Reference
PFPN-LGS34-001
Input
1 input
Range of measure
0 … 20 mA
Impedance : 62 Ohm
Accuracy (without sensor)
± 0.001 mA
Resolution
0.0006 mA
Power supply for the sensor
N.A
Operating temperature
-40°C to +85°C
Temperature measurement
Integrated temperature sensor on the electronic board
Measurement frequency
Can be set from one measure every second to one every 4 hours
Memory Capacity
Up to 32 768 measurements with date and time
Measurement securisation
Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission
Back-up of the last 32.000 measurements in Logger memory even after transmission to the receiver
Sensor connection
Through connector available on the top of the logger
> Newsteo Sensors
Battery
AA Lithium Thionyle (3,6V) included, special design with plug to maintain the battery
Accessible and user replaceable battery
Optional: dual battery pack to double battery life
Autonomy
Up to 3 years (at 25°C with a frequency measure of 15 minutes)
Dimensions
98mm x 64mm x 34mm
Weight with battery
250g
Casing
Aluminium
IP level
IP65
Radio frequency
ISM 868 MHz
Radio range
Up to 900 meters (with supplied antenna)
Antenna
1/2 wave antenna (included)
Connection cables for data logger
PFPN-SES55-001
- Cable to connect the sensor of your choice to the LGS34.
- The cable is provided with fast contactors
Evaluate the Newsteo logger with 4-20mA interface !
The kit is made of:
- A LGS34
- A cable SES55 to connect the sensor of your choice to the LGS
- A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
- A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.
Price of the kit: 309 € excl. VAT, preparation and shipping costs in addition.
