Wireless transmission for all voltage level sensor
Industrial wireless data logger
Wireless datalogger for sensor with voltage level: 0 … 10 V, 0 … 2.5 V, -50 mV to +50 mV
The Newsteo data loggers can transform any sensor with a voltage level into a wireless sensor. The client uses its sensor that connects directly to the Newsteo logger. The datalogger can transmit the sensor measurements but does not supply power.
The Logger can transmit data directly on a monitoring computer by radio frequencies or can store them in its memory waiting for the remote reading.
Product references:
- LGS35: wireless transmission and measurement system with 0-10 Volt interface
- LGS33: wireless transmission and measurement system with 0-2.5 Volt interface
LGS37: wireless transmission and measurement system with -50 mV to + 50 mV interface
- Connection cables: the client can connect the sensor of his choice
Sensors to connect:
- Displacement
- Pressure
- Level
- Gas
- …
Who uses the Newsteo datalogger with voltage level interface?
- Sensor users: move from a wired connection to a wireless connection, safer, faster to install and less expensive
How does it work?
Installing recorders / Data Loggers
Technical specifications og the Newsteo wireless dataloggers with voltage level interface
Type
LGS35: Logger with interface for sensor 0-10 V
LGS33: Logger with interface for sensor 0-2.5 V
LGS37: Logger with interface -50 mV to + 50 mV
References
PFPN-LGS35-001
PFPN-LGS33-001
PFPN-LGS37-001
Range of measure
LGS35: 0…10 V
LGS33: 0… 2.5 V
LGS37: -0.05 V … +0.05 V
Accuracy (without sensor)
LGS35: ± 0.008 V
LGS37: ± 1.6 µV
Resolution
LGS35: 0.0003 V
LGS37: 1.6 µV
Operating temperature
-40°C … +85°C
Temperature measurement
Integrated temperature sensor
Measurement frequency
Can be set from one measure every second to one every 4 hours
Memory Capacity
Up to 32 768 measurements with date and time
Measurement securisation
Acknowledgment process between the transmitter and the receiver to ensure that no data is lost during radio transmission
Back-up of the last 32.000 measurements in Logger memory even after transmission to the receiver
Sensor connection
Through connector available on the top of the logger
Battery
AA Lithium Thionyle (3,6 V) included, special design with plug to maintain the battery
Accessible and user replaceable battery
Optional: dual battery pack to double battery life
Autonomy
Up to 3 years (at 25°C with a frequency measure of 15 minutes)
Dimensions
98mm x 64mm x 34mm
Weight with battery
250g
Casing
Aluminium
IP level
IP65
Radio frequency
ISM 868 MHz
Radio range
Up to 900 meters (with supplied antenna)
Antenna
1/2 wave antenna (included)
Connection cables for data logger
PFPN-SES55-001
- Cable to connect the sensor of your choice to the LGS.
- The cable is provided with fast contactors.
Evaluate the Newsteo Wireless Datalogger
- A Newsteo wireless datalogger LGS35
- A cable SES55 to connect the sensor of your choice to the LGS
- A RF-to-USB Key medium-range (¼ wavelength antenna integrated)
- A CD-ROM containing the installation of the RF Monitor software with USB drivers, the application software of the Logger which enables the restoration of the recorded measures, and the documentation.
Price of the kit: 309 € excl. VAT, preparation and shipping costs in addition.
